MacDon R116 Unloading And Assembly Instructions page 16

5. Take to storage or assembly area, and set hitch down securely on level ground.
6. Repeat for second hitch (if required).
7. Check for shipping damage and missing parts.
8. Approach disc mower (A) from back with forklift (B) as
shown, and slide forks as far as possible into pallet.
NOTE:
Pallet is designed to be lifted from the backside only.
9. Raise disc mower off deck.
IMPORTANT:
Take care not to contact the other machine if load is
two-wide.
10. Back up until unit clears trailer, and slowly lower to
150 mm (6 in.) from ground.
11. Take to storage or set-up area, and set machine down
securely on level ground.
NOTE:
When possible, approach from the backside to
minimize potential for contacting the unit.
12. Repeat for second disc mower (if required).
13. Check for shipping damage and missing parts.
IMPORTANT:
Do NOT remove disc mower from pallet until instructed.
14. Unload remaining pallets and boxes, and take to assembly area.
214713
UNLOADING TRUCK SHIPMENT
Figure 2.2: Unloading Disc Mower
8
B
A
Revision A