ASSEMBLING THE DISC MOWER (FACTORY-INSTALLED TRANSPORT)
4.10 Installing Road Friendly Transport
1. Retrieve clevis pin (A) and cotter pin (B) from shipping
bag and install onto hitch bracket at side of hitch.
2. Remove bolt (B) holding axle assembly (A) in place.
3. Slide axle assembly (A) out of the support.
4. Install the axle assembly (A) into the opposite side of
the support as shown.
5. Install bolt (B) and nut to secure it. Torque to 68 Nm
(50 lbf·ft).
6. Remove wheel bolts from the hub (A).
214713
™ ™
Wheels
Figure 4.77: Latch Pin
A
Figure 4.78: Axle Assembly Relocation
Figure 4.79: Axle Assembly Relocation
89
B
A
B
A
B
Revision A