Converting From Transport To Field Mode (Without Road Friendly Transport ™ ) - MacDon R116 Unloading And Assembly Instructions

8.4 Converting from Transport to Field Mode (Without Road
Friendly Transport
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
1. Stop engine and remove key from ignition.
2. Connect all hydraulic hoses (refer to
harness.
3. Open the steering lock-out valve by turning the
handle (A) to the open position (in line with hose).
4. Open the lock-out valve (A) on each lift cylinder by
turning the handle to the open position (in line
with hose).
214713
TRANSPORTING THE DISC MOWER
™ ™
)
5.3.3 Connecting Hydraulics, page 98), and connect electrical wiring
Figure 8.9: Steering Lock-Out Valve in Open
Position
Figure 8.10: Lift Cylinder Lock-Out Valve
158
A
Revision A
A