MacDon R116 Unloading And Assembly Instructions page 63

ASSEMBLING THE DISC MOWER (WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT)
Installing Slow Moving Vehicle (SMV) Sign
1. Retrieve SMV sign that was previously removed.
2. Remove bolts (A), and discard existing bracket (B).
Retain the bolts and nuts.
3. Retrieve bracket (A).
4. Attach bracket (A) to left end float spring member with
M12 bolts (B) and nuts retained from earlier step.
5. Attach sign (C) to bracket (A) and secure with two
nuts (D) and bolts.
6. Remove decal bag (B) taped to the SMV bracket (A).
7. Choose the appropriate speed decal (C) or (D)
depending on region. Orient decal as shown when
installing it on the SMV bracket.
214713
B
Figure 3.112: SMV Sign
A
B
Figure 3.113: SMV Sign
A
Figure 3.114: SMV Decals
55
A
C
D
B
D
C
Revision A