Checking Cutting Angle - MacDon R116 Unloading And Assembly Instructions

7.4 Checking Cutting Angle

For a disc mower equipped with a hydraulic center-link (A),
the mid-point for header angle is indicated with the indicator
bars (B) in the center (orange) of the indicator decal.
For a disc mower equipped with a mechanical center-
link (A), the mid-point for header angle is the middle of the
adjustment range on the link.
214713
PERFORMING PREDELIVERY CHECKS
130
B
Figure 7.6: Hydraulic Center-Link
A
Figure 7.7: Mechanical Center-Link
A
Revision A