Removing Disc Mower From Shipping Pallet (No Transport Installed) - MacDon R116 Unloading And Assembly Instructions

5.9 Removing Disc Mower from Shipping Pallet (No Transport
Installed)
NOTE:
If you have the Road Friendly Transport
(Transport Installed), page
1. Cut strapping (B) securing cutterbar to pallet (C).
2. Place forks from lifting device at openings (A). Spread
them as far apart as possible to spread the load out.
3. Lift disc mower high enough that the pallet can be
removed.
4. Use a chain or forklift to remove shipping pallet (A) from
underneath the disc mower.
5. Lower the disc mower to the ground.
214713
SETTING UP THE TRACTOR
™
system, refer to
117.
5.10 Removing Disc Mower from Shipping Pallet
A
Figure 5.56: Strapping
Figure 5.57: Removing Shipping Pallet
116
A
C
B
A
Revision A