Checking Roll Timing - MacDon R116 Unloading And Assembly Instructions

7.12 Checking Roll Timing

Check roll timing if excessive noise is coming from the conditioner rolls.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
Roll timing is factory-set and should not require adjustment; however, if there is excessive noise coming from the
conditioner rolls, the timing will need to be adjusted. Refer to the disc mower operator's manual.
214713
PERFORMING PREDELIVERY CHECKS
142
Revision A