Recommended Lubricants - MacDon R116 Unloading And Assembly Instructions

11.5 Recommended Lubricants

Keep your machine operating at top efficiency by using only clean lubricants and by ensuring the following:
•
Use clean containers to handle all lubricants.
•
Store lubricants in an area protected from dust, moisture, and other contaminants.
IMPORTANT:
Do NOT overfill the cutterbar when adding lubricant. Overfilling could result in overheating and failure of cutterbar
components.
Table 11.1 Recommended Lubricants
Lubricant Specification
SAE
Grease
Multipurpose
SAE
Grease
Multipurpose
Gear
SAE 80W-90
Lubricant
Gear
SAE 80W-90
Lubricant
Gear
SAE 85W-140
Lubricant
Gear
SAE 85W-140
Lubricant
Gear
SAE 85W-140
Lubricant
Gear
SAE 85W-140
Lubricant
214713
REFERENCE
Description
High temperature
extreme pressure (EP)
performance with 1%
max. Molybdenum
Disulphide (NLGI
Grade 2) lithium base
High temperature
extreme pressure (EP)
performance with 10%
max. Molybdenum
Disulphide (NLGI
Grade 2) lithium base
High thermal and
oxidation stability API
service class GL-5
High thermal and
oxidation stability API
service class GL-5
Gear lubricant API
service class GL-5
Gear lubricant API
service class GL-5
Gear lubricant API
service class GL-5
Gear lubricant API
service class GL-5
207
Use
As required unless
otherwise specified
Driveline slip-joints
4.0 m (13 ft.)
Cutterbar
4.9 m (16 ft.)
Cutterbar
Conditioner roll timing
gearbox
Cutterbar-conditioner
drive gearbox
Hitch (front) swivel
gearbox
Header (rear) swivel
gearbox
Capacities
—
—
8 liters
(8.5 qts [US])
10 liters
(10.5 qts [US])
0.7 liters (0.75 qts [US])
1.8 liters (1.9 qts [US])
Upper: 1.2 liters (1.3 qts [US])
Lower: 1.7 liters (1.8 qts [US])
Upper: 1.2 liters (1.3 qts [US])
Lower: 1.7 liters (1.8 qts [US])
Revision A