Moving Front (Left) Wheels Into Field Position - MacDon D65 Operator's Manual

6. Attach header to windrower.
operator's manual for instructions.
IMPORTANT
Carrying the tow-bar on the header will affect
the main header float.
4.7.2 Header Float, page 56
procedures.
7. Put front and rear transport wheels into Field position.
Refer to
• Moving Front (Left) Wheels into Field Position, page
93 and
• Moving Rear (Right) Wheels into Field Position,
page 95.

Moving Front (Left) Wheels into Field Position

To move the front (left) transport wheels into field position,
follow these steps.
DANGER
To avoid bodily injury or death from unexpected
start-up or fall of raised machine, always stop
engine, remove key, and engage safety props
before going under header for any reason. See
your windrower operator's manual for instructions
for use and storage of header safety props.
1. Raise header fully. Engage header safety props.
169594
OPERATION
Refer to windrower
Refer to Section
for adjustment
93
Rev. C