MacDon R116 Unloading And Assembly Instructions page 61

ASSEMBLING THE DISC MOWER (WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT)
Connecting Selector Valve and Transport Lighting Module
1. Locate plugs P102 (A) and P502 (B) on the transport
harness at the header end of the hitch. Route plugs
P102 (A) and P502 (B) towards selector valve (C).
2. Connect plug P502 (B) to the receptacle on selector
valve (C).
3. Connect plug P102 (A) to the upper input receptacle on
transport lighting module (D).
Installing Remote Control
1. Retrieve remote control (A) with wiring harness.
2. Place remote control (A) on hitch temporarily.
3. Locate connector (C) that branches off the seven-pole
transport plug (A) and attach it to the remote wiring
harness (B).
214713
Figure 3.107: Selector Valve Supply
Figure 3.108: Remote Control on Top of Hitch
Figure 3.109: Transport Harness
53
C
B
A
A
B
C
D
A
Revision A