ASSEMBLING THE DISC MOWER (FACTORY-INSTALLED TRANSPORT)
19. At rear of hitch, secure the hoses with adjustable
strap (A).
20. Connect hose (A) from left lift cylinder and hose (B)
(MD #224160 or MD #224162) at the hitch pivot.
4.8.4 Installing Electrical Components
Connecting Selector Valve and Transport Lighting Module
1. Locate plugs P102 (A) and P502 (B) on the transport
harness at the header end of the hitch. Route plugs
P102 (A) and P502 (B) towards selector valve (C).
2. Connect plug P502 (B) to the receptacle on selector
valve (C).
3. Connect plug P102 (A) to the upper input receptacle on
transport lighting module (D).
214713
Figure 4.67: Lift Hoses
Figure 4.68: Lift Hoses
Figure 4.69: Selector Valve Supply
84
A
B
A
C
B
A
D
Revision A