MacDon R116 Unloading And Assembly Instructions page 43

ASSEMBLING THE DISC MOWER (WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT)
6. Install two M20 x 65 bolts (A), hardened washers,
and nuts.
7. Temporarily install bolts (B) to help align the assembly.
8. Rotate pin (A), until hole in pin aligns with holes in
welded collar (B). Insert pin (C) (MD #19958) through
the collar and pin.
9. Insert cotter pin (D) (MD #18608) and bend over the
legs to secure it.
10. Retrieve cover assembly (B) from the shipping location.
11. Remove two bolts (A) from the cover assembly (B).
Retain bolts and cover for installation later.
214713
Figure 3.62: Pin Support
Figure 3.63: Pin Installation
B
Figure 3.64: Cover Assembly
35
B
A
A
C
D
B
A
Revision A