23. If Road Friendly Transport
reconnect electrical harness (A) to lights (B) and secure
harness to shielding using existing clips (C) and (D).
24. Secure harness to light bracket with cable ties (E).
25. Tighten the four M10 hex head bolts (A) and
flat washers. Torque to 27–30 Nm (20–22 lbf·ft).
26. Check float settings. Refer to
Mower Float, page 132
214713
CHANGING THE CONDITIONER
™
system is installed,
7.6.1 Adjusting Disc
for float adjustment instructions.
A
Figure 9.33: Electrical Harness
Figure 9.34: Electrical Harness
185
C
D
B
E
A
Revision A