5.8.2 Installing Discharge Shield (No Conditioner)
Follow these steps to install the shielding on a disc mower configured without a conditioner:
1. Raise the mower fully and extend the center-link to
maximize the space between field wheels (A) and
carrier frame (B).
2. Close lift cylinder lock-out valves (A) on both sides of
the mower. Valve handles should be in the closed
position (90 degree angle to the hose).
3. Rotate shield (A) and pass it between the field wheels
and the carrier frame toward the mower.
214713
SETTING UP THE TRACTOR
Figure 5.50: Disc Mower with Transport
Figure 5.51: Lift Cylinder Lock-Out Valves
Figure 5.52: Shield Rotated
114
B
A
A
A
Revision A