Connecting The Ecg Cable And Ecg Electrodes - Weinmann MEDUCORE Standard2 Instructions For Use Manual

4 Preparation
4.6 Connecting the ECG cable and ECG
64 EN MEDUCORE Standard
electrodes
Damage to the device caused by ingress of liquids!
The device is only protected from water jets as per IP55 when the
battery is inserted, the water jet protection for the SD card slot is
closed and the lines for the ECG, SpO
connecting tube including NIBP cuff are connected. Ingress of
liquids and dust may damage the device, components, and
accessories.
⇒ Do not immerse the device, components, or accessories in
liquids.
⇒ Only operate the device with the battery inserted.
⇒ Always close the water jet protection of the SD card slot.
⇒ Always leave the lines for ECG, SpO
connecting tube including NIBP cuff connected.
1. Connect the ECG connector of the ECG cable to the ECG
connection for the ECG cable on the device.
2. Bare the patient's torso.
2
, trunk cable and NIBP
2
, trunk cable and NIBP
2