3. If necessary: Open the application menu with the navigation
knob and change the device volume.
4. If necessary: Switch between parameter view and curve view
with the view button
5. Evaluate the ECG leads and heart rate.
6. If necessary: Select another ECG lead by pressing the Lead
function button.
7. If necessary: Make the following ECG settings in the user menu
(see "7.3.2 ECG settings", page
•
Adapt amplitude scaling in order to adapt the displayed
height of the ECG curve to the ECG measuring signal.
•
Activate autoscaling in order to have the height of the ECG
curve automatically displayed adapted to the ECG
measuring signal.
•
Adapt the feed speed of the ECG curve.
•
Activate the filter to filter disturbances caused by the line
supply network out of the ECG display.
If necessary: Set alarm limits in the user menu
Alarm settings", page
or
.
113):
111).
MEDUCORE Standard
5 Operation
(see "7.3.1
2
EN
91