Alarm Settings - Weinmann MEDUCORE Standard2 Instructions For Use Manual

8 Operator menu

8.3 Alarm settings

122 EN MEDUCORE Standard
Risk of injury due to alarm limits which
are too high or too low!
Alarm limits which are either too high or too low can prevent the
device from emitting an alarm, thereby putting the patient at risk.
⇒ Always set alarm limits which have been adapted to the
patient.
Risk of injury from different alarm presets in the same or
similar devices!
Different alarm presets in the same or similar devices in different
application areas can confuse the user and result in injury to the
patient.
⇒ Select the same alarm presets in the same or similar devices.
You can make presets for the alarm system in the alarm setup
menu.
The factory settings are selected so that the guidelines required by
the standards are met and a high level of safety is achieved.
Changes to the alarm settings can lead to an increased risk for the
user and the patient, for example if the alarm limit range is
expanded or if pause audio is extended.
You can adapt the device to the patient group and the application
area using the relevant alarm settings.
2