Operation/Data Management; Alarm Delay Times - Weinmann MEDUCORE Standard2 Instructions For Use Manual

15 Technical data

15.10 Operation/data management

Specification
Display
Audio outputs
Session documentation
Data transfer
Data evaluation

15.11 Alarm delay times

Alarm
Battery defective
Insert battery
Asystole
• Patient is connected with this condition
• Patient already connected
ECG module defective
Heart rate (with derivation via defibrillation
electrodes)
• Patient is connected with this condition
• Patient already connected
Heart rate (with derivation via defibrillation
electrodes)
• Patient is connected with this condition
• Patient already connected
Heart rate (with derivation via ECG electrodes)
• Patient is connected with this condition
• Patient already connected
Heart rate (with derivation via ECG electrodes)
• Patient is connected with this condition
• Patient already connected
Pulse rate
Pulse rate
184 EN MEDUCORE Standard
Operation/data management
Light symbols
Device status indicators
Voice prompts
Alarm tones
Signal tones
Automatic recording of ECG, SpO
measurement values and event data
Via SD card: SD card with 32 GB
Via DEFIview PC software
Delay time
10.0 s
10.0 s
9.6 s
8.5 s
10.0 s
3.0 s
1.7 s
9.7 s
6.0 s
8.0 s
2.0 s
14.9 s
5.0 s
10.0 s
10.0 s
2
and NIBP
2