Weinmann MEDUCORE Standard2 Instructions For Use Manual page 67

4-2 Shortened position for ECG electrodes
8. If the ECG electrodes are used at the same time as the
defibrillation electrodes: Do not allow ECG electrodes and
defibrillation electrodes to overlap.
9. If necessary: Stroke out any trapped air from under the ECG
electrodes.
10. Clip the ECG cable to the individual ECG electrodes.
11. Switch on the device
76).
12. Select the patient group in the start menu.
13. Check whether the ECG curves for ECG measurement
displayed on the device are plausible.
Result The ECG cable and the ECG electrodes are connected.
R/RA
N/RL
(see "5.1 Switching the device on", page
MEDUCORE Standard
4 Preparation
L/LA
F/LL
2
EN 67