Selecting The Patient Group - Weinmann MEDUCORE Standard2 Instructions For Use Manual

5 Operation
Result
Action
In a menu
-
Press event button
Press the NIBP -
button

5.4 Selecting the patient group

Requirement
78 EN MEDUCORE Standard
Within a menu
item
-
-
When you select a patient group, the presets which the operator
specified for this patient group are loaded. If the operator has not
specified presets, the factory settings are loaded.
The device is switched on
76).
1. When the start menu is active: Select the patient group with
the navigation knob.
or
2
In the start
menu
-
-
(see "5.1 Switching the device on", page
In a mode
Manually saves an
event in the data set.
• Activate the NIBP
function mode
(press for < 2 s)
• Start NIBP
measurement
(press for > 2 s)