Weinmann MEDUCORE Standard2 Instructions For Use Manual page 56

4 Preparation
Result
4.3.3 Charging the battery with the charging station
4.3.4 Changing the battery
Requirement
Result
56 EN MEDUCORE Standard
2. When the battery status indicator lights up green and/or the
symbol
device from the charging interface or from the power supply
unit and charger.
The battery is fully charged.
You can also charge the battery with the charging station
WM 45190. Follow the Instructions for Use for the charging
station.
The replacement battery is fully charged.
1. If the device is not connected to the line power: Switch off the
device (see "5.2 Switching the device off", page
2. Take battery out of the battery compartment.
3. Slide the replacement battery into the battery compartment
until it audibly clicks into place.
4. If necessary: Switch on the device
device on", page
The symbol
The battery is changed.
2
appears on the display: Disconnect the
(see "5.1 Switching the
76).
appears on the display.
77).