Preparing For Use; Setting Up And Connecting The Device - Weinmann homecare SOMNOsoft + WM 24600 Description And Operating Instructions

4. Preparing for use

4.1 Setting up and connecting the device

1. Place the device on a level surface, e.g. on the bedside cupboard or on the floor beside
the bed.
Make sure there is a gap of at least 5 cm between the wall and the rear of the device,
as the air intake is at the rear.
Important
Do not cover up the device.
2. Run the power cord
SOMNOsoft + automatically detects whether the mains supply is 115 V or 230 V and
switches automatically.
The display shows "0" for standby.
W A N D
IN D C -A C
IN V E R
D C -A C
O U T
Use the power cord
connection
29
10 Preparing for use
from the power connection
3
3. If the SOMNOsoft + is to be run on a voltage of 12 or
24 V DC, connect the power inverter
L E R
lighter.
T E R
For this purpose, use either:
– Power inverter 12 V, WM 24131
– Power inverter 24 V, WM 24132
to connect the power socket of the power inverter to the power
3
of the SOMNOsoft +.
4. Insert the adapter
outlet port
Note:
The appliance automatically compensates for differenc-
es in air pressure (e.g. due to high altitude).
to a mains socket.
29
for the hose system in the device
10
.
7
to a cigarette
32