Weinmann MEDUCORE Standard2 Instructions For Use Manual page 113

7.3.2 ECG settings
Parameter
Amplitude scaling
Speed
Line filter
7-3 ECG settings sub-menu
Possible values
auto
2 mm/mV
5 mm/mV
10 mm/mV
20 mm/mV
12.5 mm/s
25 mm/s
50 mm/s
Activated
Deactivated
Description
Here you can set the strength of the
ECG signal and thus the height of
the ECG curve.
If the auto setting has been
selected, the strength of the ECG
signal and thus the height of the
ECG curve are adapted
automatically so that a maximum
height is displayed.
Here you can set the speed of the
ECG curve display and thus change
the temporal resolution.
By activating the line filter, you can
reduce ECG disturbances caused by
the power supply network.
MEDUCORE Standard
7 User menu
Factory setting
auto
25 mm/s
Activated
2
EN 113