Cardiobiphasic Defibrillation System - Weinmann MEDUCORE Standard2 Instructions For Use Manual

Monitor/defibrillator
Hide thumbs Also See for MEDUCORE Standard2:
Table of Contents

Advertisement

15.5 CARDIObiphasic defibrillation system

Specification
Operating mode
Shock form
Patient impedance:
Max.
Min.
Shock sequence
Analysis time
Time taken for analysis and shock charging in the
AED mode:
With fully charged energy source
After 15 discharges
After 6 discharges
Time taken to switch on device, perform analysis and
charge shock in the AED mode:
With fully charged energy source
After 15 discharges
After 6 discharges
CPR phase adjustable
Energy level adjustable
Time taken to charge shock in manual mode
Impedance compensation
Defibrillator voltage
Recovery time for the derivation of defibrillation
electrodes after a defibrillation shock
Analysis unit
Defibrillation system
Semi-automatic (AED mode)
Manual (Manual mode)
Biphasic, current-limited, impedance-compensated
200 Ω
5 Ω
Adjustable:
Energy curve:
First shock: 1 J to 200 J
Further shocks: 1 J to 200 J
8 s under typical conditions
8 s to 15 s
8 s to 15 s
8 s to 15 s
< 25 s
< 25 s
< 25 s
120 s to 300 s
1 J to 200 J
(see "15.14 The CARDIObiphasic shock
impulse", page 187)
2 s to 9 s (depending on the selected shock energy)
Yes
2 kV
5 s
Capacitor charging is canceled if there is an
unshockable signal.
Capacitor charging is canceled if a shockable signal
is detected during the first analysis, but an
unshockable signal is detected during charging.
MEDUCORE Standard
15 Technical data
2
EN
179

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents