Performing Pulse Oximetry Monitoring - Weinmann MEDUCORE Standard2 Instructions For Use Manual

5.6 Performing pulse oximetry
monitoring
Requirement •
•
•
1. If necessary: Select another patient group
2. If necessary: Select the monitor mode by pressing the Monitor
3. If necessary: Switch between parameter view and curve view
4. In the parameter view: Read off the measured values for
The device is switched on
page 76).
A patient group is selected
group", page 78).
A pulse oximetry sensor is connected
pulse oximetry sensor", page
the patient group", page
function button.
with the view button
arterial oxygen saturation (SpO
or
(see "5.1 Switching the device on",
(see "5.4 Selecting the patient
(see "4.5 Connecting the
60).
78).
.
) and pulse rate (Pulse).
2
MEDUCORE Standard
5 Operation
(see "5.4 Selecting
2
EN 89