Updating The Software - Weinmann MEDUCORE Standard2 Instructions For Use Manual

5.16 Updating the software

Requirement •
•
•
Damage to the device due to battery failure or lack of line
power!
If the power supply to the device is cut during the software update
due to a battery failure or lack of line power, the device may be
damaged to such an extent that it needs to be repaired.
⇒ Always connect the device to the line power with a charged
1. If necessary: Download the current software from the Login
2. If the software is available as a ZIP file: Unzip the software.
3. Place the file in the SD card's root directory. When doing so,
4. Switch on the device
5. Call up the operator menu with the menu key
6. Select System settings | Software.
A charged battery is inserted in the device.
The device is connected to the line power.
The device is off and an SD card with new software is in the SD
card slot.
battery for software updates.
area of the WEINMANN Emergency website to the SD card.
please note: The file must not be in a sub-folder.
76).
The start menu appears.
(see "8.1 Navigating the operator menu", page
(see "5.1 Switching the device on", page
MEDUCORE Standard
5 Operation
and enable
117).
2
EN 103