Using The Audio Alarm Output - Weinmann MEDUCORE Standard2 Instructions For Use Manual

Performing venous stasis
Requirement •
•
•
•
1. Press the NIBP button
2. Press the iv function button.
Risk of injury from deflating the pressure in the NIBP cuff too
soon.
On expiry of the timer, the venous stasis ends automatically. If the
intravenous access is not created during this time, this can injure
the patient.
⇒ Create the access before the timer expires.
⇒ If the access cannot be created before the timer expires: Abort
3. Create the intravenous access.
4. Once the access has been created: Release the pressure from
Result A venous stasis is created.

5.9 Using the audio alarm output

5.9.1 Canceling the audio alarm output
Requirement An alarm is active and is audible.
1. Briefly (< 2 s) press the alarm button
An NIBP cuff is connected to the NIBP connecting tube
"4.7 Attaching the NIBP cuff", page
The device is switched on
page 76).
The Adult patient group is set.
A mode is set.
The device switches to NIBP function mode.
The NIBP cuff is inflated to the pressure set in the operator
menu. The timer displaying the duration of venous stasis
expires. During the venous stasis time, the pressure of the NIBP
cuff is maintained.
and provide medical treatment to the puncture site.
the NIBP cuff with the Stop function button.
68).
(see "5.1 Switching the device on",
for < 2 s.
MEDUCORE Standard
5 Operation
(see
.
2
EN 97