Reprocessing The Device After Use - Weinmann MEDUCORE Standard2 Instructions For Use Manual

Requirement •
•
1. Press event button
Result The device saves an event with the designation Manual event in
the session data set and an acknowledgment tone is heard.

5.11 Reprocessing the device after use

1. Remove disposable articles from the patient and dispose of
2. Remove the short-term NIBP cuffs from the patient and check
3. If necessary: Include new short-term NIBP cuffs with the device.
4. Include new disposable articles and, if necessary, a short-term
5. Hygienically reprocess the device, components and accessories
6. If necessary: Place components and accessories on the portable
7. If necessary: Store the device, components and accessories
Result The device is reprocessed following use.
The device is switched on
page 76).
The patient group is set
page 78).
them:
• Defibrillation electrodes
• ECG electrodes
• Disposable pulse oximetry sensor
• Disposable NIBP cuff for neonates
the duration of use.
NIBP cuff with the device.
(see "9 Hygienic reprocessing", page
system or in the protective transport bag.
"13 Storage", page
(see "5.1 Switching the device on",
(see "5.4 Selecting the patient group",
.
144).
172).
MEDUCORE Standard
5 Operation
(see
2
EN 99