D-Link 5000 Series Cli Reference Manual page 1148

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
11-142 ip community-list
To create or configure a BGP community list, use the ip community-list command in Global
Configuration mode. Acommunity list statement with no community values is considered a match for all
routes, regardless of their community membership. So the statement ip community-list bullseye permit
is a permit all statement.
A community number may be entered in either format, as a 32-bit integer or a pair of 16-bit integers
separated by a colon, regardless of whether the
16 communities, including the well-known communities, can be listed in a single command. Up to 32
statements may be configured with a given community list name. Up to 128 unique community list names
may be configured.
Use the no command to delete a community list.
ip community-list standard list-name {permit | deny} [community-number] [no-advertise] [no-
export] [no-export subconfed] [no-export]
no ip community-list standard list-name
Parameters
standard list-name
permit
deny
community
no-advertise
no-export
no-export-subconfed
no-export
Default
The default is Community lists are not configured.
Command Mode
Global Config
11-143 show ip as-path-access-list
This command displays the contents of AS-PATH access lists.
"ip bgp-community new-format"
ldentifies a named standard community list. The name may contain up
to 32 characters.
Indicates that matching routes are permitted.
Indicates that matching routes are denied.
(Optional) From 0 to 16 community numbers formatted as a 32-bit
integers or in AA:NN format, whereAA is a 2-byte autonomous system
number and NN is a 16 bit integer. The range is 1 to 4,294,967,295 (any
32-bit integer other than 0). Communities are separated by spaces.
(Optional) The well-known standard community, NO_ADVERTlSE
(0xFFFFFF02).
(Optional) The well-known standard community, NO_EXPORT,
(0XFFFFFF01).
(Optional) Deny only routes that are not exported to other external
peers.
(Optional) Deny only routes that are not exported to other peers.
1142
command is active. Up to