D-Link 5000 Series Cli Reference Manual page 1182

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
set-cos-transmit
set-dscp-transmit
set-prec-transmit
Default
The default is None.
Command Mode
Policy-Class-Map Config
Example
The following shows an example of the command.
(Routing)(Config-policy-classmap)#po1ice-simple 1 128 conform-action transmit violate-
action drop
Incompatibilities
Drop, Mark (all forms)
12-53 police-single-rate
This command is the single-rate form of the police command and is used to establish the traffic policing
style for the specified class. For each outcome, the only possible actions are drop, set-cos-as-sec-cost,
set-cos-transmit, set-sec-cos-transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this single-rate
form of the police command, the conform action defaults to send, the exceed action defaults to drop, and
the violate action defaults to drop. These actions can be set with this command once the style has been
configured.
police-single-rate {1-4294967295 1-128 1-128 conform-action {drop | set-cos-as-sec-cos | set-
cos-transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 | set-dscp-transmit 0-63 |
transmit} exceed-action {drop | set-cos-as-sec-cos | et-cos-transmit 0-7 | set-sec-cos-transmit
0-7 | set-prec-transmit 0-7 | set-dscp-transmit 0-63 | transmit} [violate-action {drop | set-cos-as-
sec-cos-transmit | set-cos-transmit 0-7 | set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 | set-
dscp-transmit 0-63 | transmit}]}
Parameters
conform-action & violate-
action
been configured. Beside, the set-cos-transmit is to combine only with
drop between the conform-action and the violate-action.
Priority value is required and is specified as an integer from 0-7.
Required and specified as either an integer from 0 to 63, or symbolically
through one of the following keywords: af11, af12, af13, af21, af22, af23,
af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6,
cs7, ef.
IP Precedence value is required and is specified as an integer from 0-7.
The conforming data rate is specified in kilobits-per-second (Kbps) and
is an integer from 1 to 4294967295. The conforming burst size is
specified in kilobytes (KB) and is an integer from 1 to 128. For each
outcome, the only possible actions are drop, set-dscp-transmit, set-prec-
1176