Function of CMTimeChart
• This is a function to display data logged in the memory of FP7 MC Unit as time chart by
reading it.
• Up to 256 monitored devices can be registered. Also, up to 16 trigger conditions can be set
as triggers to start logging data.
• Logging data can be executed by setting the logging condition and downloading it to the unit.
Execution procedure of CMTimeChart
Item
①
Start CMTimeChart.
②
Register devices.
③
Set trigger conditions.
Download setting
④
data for
CMTimeChart.
⑤
Start and stop the
logging operation.
⑥
Upload logging data.
Starting CMTimeChart
CMTimeChart can be started from the menu of CMI.
Select "Online" > "Time Chart" from the menu bar.
Description
CMTimeChart can be started from the menu of CMI.
Set devices to be logged. (Max. 256 devices) Word devices and
bit devices in the unit memories can be specified for devices to
be logged.
Specify conditions used as triggers for logging (Max. 16
conditions). Leading edges and trailing edges of bit devices or
values of word devices can be set as comparison conditions.
Download set conditions (registered devices and trigger
conditions).
Start and stop the logging operation by the CMTimeChart
operation or user programs. The logging situation can be
confirmed in the monitor of CMTimeChart or unit memories.
When the logging operation is complete and log data is stored
in FP7 MC Unit, data can be uploaded. When uploading logging
data, it can be confirmed as a time chart.
14.1 Overview of Function
Reference
p.14-4
p.14-6
p.14-12
p.14-13
p.14-20
14-3