Names and Functions of Parts
2.1 Names and Functions of Parts
2.1.1 Names and Functions of Parts
①
②
③
Names and Functions of Parts
No.
Name
①
Operation monitor
LEDs
②
Card cover
a
Card slot
b
COPY switch
Memory selector
c
switch
③
Network connector
(RJ45)
④
DIN hook
⑤
Unit connector
⑥
Mode setting switch
⑦
Fixing hook
2-2
⑦
⑥
⑤
④
Function
Indicates the state of EtherCAT communication, the occurrence states of unit's
errors and alarms.
An SD memory card slot is located under the cover.
An SD memory card is inserted.
This is provided for expansion. Use the switch at the factory default (lower side)
as it is.
This is provided for expansion. Use the switch at the factory default (lower side)
as it is.
This is the connector for connecting to EtherCAT.
This hook is used to install the unit on a DIN rail.
Connects the internal circuits between units.
This switch is used for the system. Use this at the factory default (nos.1-3: ON,
no.4: OFF) as it is.
This hook is used to fix units.
②-a
②-b
②-c
⑥