Table of Contents
Advertisement
CMTimeChart Monitor
When Trigger mode is "Normal"
After the logging operation is executed, the data at the point of time whenever the trigger
condition is met will be logged and stored as data. When the "Upload logging data" operation
is performed on CMTimeChart, the time chart displays only the latest information.
Announce trigger registration
(UM 02630_bit0)
Allow trigger use
(UM 02631_bit0)
Waveform logging enable
(YB)
Waveform logging active
annunciation
(XB)
Trigger detection
Logging flag
(UM 02632_bit0)
Presence/absence of
logging data
(UM 02633_bit0)
(Note): If the waveform logging enable (YB) flag turns on before turning on "Allow Trigger Use (UM02631)", the
logging operation will not be executed.
14-18
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Measurement
time
ON
OFF
(Note)
Measurement
Measurement
time
time
Advertisement
Table of Contents
