Table of Contents
Advertisement
Unit
Axis no.
memory
no. (Hex)
1
UM 63F9A
UM 63F9B
1
-UM 63FAF
(Note): The above table shows the unit memory numbers of axis number 1. For details of the whole configuration,
refer to "16.8.1 Configuration of Synchronous Control Setting Area".
16.8 Unit Memories (Synchronous Control Setting Area)
Name
Default Description
Advance
angle
correction
U100
parameter
change time
Reserved for
-
system
Set the time required until a changed value is
reflected when the parameter related to advance
angle correction (advance angle correction
reference speed or advance angle correction
reference amount) is changed during the electronic
cam operation.
Range: 0 to 10,000 (ms)
Any other settings will be errors.
-
●: Available, -: Not available
R
W
-
16-81
-
Advertisement
Table of Contents
