When Trigger mode is "Auto"
While the logging enable flag (YB) is on, the logging operation is continued and data is stored.
Once the loggings enable flag (YB) turns off, the data from the time traced back by the
measurement time specified in "CMTimeChart" until the stop will be stored.
Announce trigger registration
(UM 02630_bit0)
Allow trigger use
(UM 02631_bit0)
Waveform logging enable
(YB)
Waveform logging active
annunciation
(XB)
Logging flag
(UM 02632_bit0)
Presence/absence of
logging data
(UM 02633_bit0)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
14.5 Start and Stop of Logging Operation
Measurement
time
14-19