2.3 Names and Functions of Parts of the GM1 Pulse Output Unit
2.3 Names and Functions of Parts of the GM1 Pulse Output Unit
No.
Name
(1)
Unit connector
(2)
Operation monitor LEDs
Operation monitor selection
(3)
switch
(4)
Output connector
(5)
Expansion hook
(6)
DIN rail attachment part
(7)
DIN hook
■
Names and functions of each operation monitor LED
No.
Name
(1)
Power
(2)
Alarm
(3)
A
2-6
Function
This is a connector to which each expansion unit is connected.
These LEDs indicate the status of expansion units.
This switches operation display between the display for axes 1 and
2, and that for axes 3 and 4.
This is used to connect an output device.
This is a hook used to fix each expansion unit to another.
This is the part which is attached to the DIN rail.
Used to fix the Controller to a DIN rail
LED color
Function
Indicates the completion of power processing of the unit.
Lit: Power supply of the unit is started normally.
Blue
Unlit: Power is not supplied. Or, there is an error in the power supply
to the system.
Indicates that an alarm has occurred in the unit.
Red
Lit: Unit error
Unlit: Normal
Green
Indicates the pulse output A signal.
(Note 1)
WUME-GM1PG-01