Table of Contents
Advertisement
1.3 Names and Functions of Parts
1.3.1 Analog Input Unit (AFPXHEAD4)
■
Product image
(1)
(2)
(3)
■
Names and functions of parts
No.
Name
(1)
Power indicator LED
(2)
Power supply terminal
(3)
Expansion cover
(4)
Analog terminal block 1
(5)
Terminator setting DIP switch Turn ON all the switches on the DIP switch for the terminal Expansion
(6)
Expansion connector
(7)
Expansion connector
(8)
DIN rail mounting groove
(9)
DIN hook
WUME-FPXHAIO-01
(4)
(5)
(6)
Function
Lights up when the power is turned on.
This is used to connect the power supply to drive the Unit.
Remove the cover when connecting the expansion cable. Attach the
cover after the expansion cable is fitted.
This is used to connect analog input devices (CH0 to CH3).
Unit.
Turn OFF all the switches on the DIP switch for the Expansion Units
other than the terminal Expansion Unit.
This is used to connect the expansion cable for mounting the
Expansion Unit. (Control unit side)
This is used to connect the expansion cable for mounting the
Expansion Unit.
It can be mounted on a 35-mm-wide DIN rail.
Used for securing the unit on a DIN rail.
1.3 Names and Functions of Parts
(7)
(8)
(9)
1-5
Advertisement
Table of Contents
