HEIDENHAIN iTNC 530 Service Manual page 95

The following information is available:
July 2010
Press the DRIVE INFORMATION soft key. --> A new window opens:
Available information can be called by activating the displayed soft keys.
Soft key Function
In Overview of all drives you use these soft keys to select a drive. The
following soft keys display more detailed information.
If an absolute speed encoder with EnDat interface is connected, a detailed display
of the encoder information appears.
If an absolute position encoder with EnDat interface is connected, a detailed
display of the encoder information appears.
The motor data for the selected motor is displayed from the motor table.
If a HEIDENHAIN motor with an electronic ID label is connected, a display of the
information stored in the ID label appears.
If a HEIDENHAIN power module with an electronic ID label is connected, a display
of the information stored in the ID label appears.
Press the END soft key to leave the individual pages and the drive information.
9 – 95