HEIDENHAIN iTNC 530 Service Manual page 573

Calling the machine
parameter editors
The active machine parameter list appears on the screen in the Machine Parameter Programming
mode:
July 2010
Select the Programming and Editing operating mode.
If open: Close the program management by pressing the END button.
Note
Pressing the MOD key while the program manager is open calls the interface settings.
Call the code number window.
Note
If the message "Line is write-protected" is displayed when trying to edit a machine-
parameter value, individual machine parameters or the complete MP list is protected against
editing.
The machine manufacturer has defined an own MP code number. --> Please contact your
machine manufacturer!
Press the END key to exit the MP list.
Enter the code number and press ENT to confirm.
30 – 573