Display And Operation - HEIDENHAIN iTNC 530 Service Manual

30.4.12 Display and operation

MP Function and input
MP7210 Programming station
Input:
1: Programming station with PLC active
2: Programming station with PLC inactive
3: Programming station with PLC and emergency stop active
MP7212 Power interrupted message
Input:
1: Power Interrupted message does not appear
MP7220 Block number increment for ISO programs
Input:
MP7224 Lock specific file types
Input:
1: Disable
Bit 0 – HEIDENHAIN programs *.H
Bit 1 – ISO programs *.I
Bit 2 – Tool tables *.T
Bit 3 – Datum tables *.D
Bit 4 – Pallet tables *.P
Bit 5 – Text files *.A
Bit 6 – HELP files *.HLP
Bit 7 – Point tables *.PNT
MP7224.0 Disabling soft keys for file types
MP7224.1 Protecting file types
MP7224.2 Disable the EDIT ON/OFF soft key
MP7225 Disable Windows drives in the TNC file manager
Format:
Input:
MP7225 = CDE
MP7226.0 Reserved
MP7226.1 Size of the datum table
Input:
MP7229 Properties of the NC program
MP7229.0 Line number for program testing
Input:
MP7229.1 Program length up to which FK blocks are permitted
Input:
July 2010
0: Controlling and programming
0: Acknowledge the Power interrupted message with CE key
0 to 250
0: Do not disable
ABCDEFGHIJKLMNOPQRSTUVWXYZ
If there are more than one drive, they are entered without spaces, e.g.
0 to 255 [lines]
100 to 9999
100 to 9999
SW version
and
behavior
CN123
340 49x-02
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
340 422-07,
340 480-07
340 480-06
PLC
RUN
PLC
RUN
CN123
PLC
RUN
CN123
30 – 617