List Of Machine Parameters; Encoders And Machines - HEIDENHAIN iTNC 530 Service Manual

30.4 List of Machine Parameters

(excerpt from the Technical Manual of iTNC 530 of May 2009)

30.4.1 Encoders and machines

MP Function and input
MP10 Active axes
Format:
Input:
0: Axis not active
1: Axis active
MP12 Axis-specific demo operation for NC axes
Format:
Input:
0: Demo operation not active
1: Demo operation active
MP20 Monitoring functions for the axes
Format:
Input:
0: Monitoring not active
1: Monitoring active
MP20.0 Absolute position of the distance-coded reference marks
MP20.1 Amplitude of encoder signals
MP20.2 Edge separation of encoder signals
MP21 Monitoring functions for the spindle
Format:
Input:
Bit 0 – Spindle 1
0: Monitoring not active
1: Monitoring active
Bit 1 – Spindle 2
0: Monitoring not active
1: Monitoring active
MP21.0 Absolute position of the distance-coded reference marks
MP21.1 Amplitude of encoder signals
MP21.2 Edge separation of encoder signals
MP100 Designation of axes
Format:
Input:
MP100.0 Traverse range 1
MP100.1 Traverse range 2
MP100.2 Traverse range 3
MP110.x Assignment of position encoder inputs to the axes
Input:
1 to 6: Position encoder inputs X1 to X6
35 to 38: Position encoder inputs X35 to X38
201 to 214: Position encoder inputs X201 to X214
30 – 580
%xxxxxxxxxxxxxx
Bits 0 to 13 represent axes 1 to 14
%xxxxxxxxxxxxxx
Bits 0 to 13 represent axes 1 to 14
%xxxxxxxxxxxxxx
Bits 0 to 13 represent axes 1 to 14
%xx
-wvucbazyxWVUCBAZYX
Characters 1 to 9 from the right represent axes 1 to 9
0: No position encoder input
HEIDENHAIN Service Manual iTNC 530
SW version
and
behavior
PLC
RUN
PLC
RUN
PLC
RUN
PLC
RUN
PLC
RUN
RESET