13.8.2 Interface configuration and assignment of mode
Press the following key combination to call the main screen for interface configuration:
Calling the
interface setup
The data interface RS-232-C (V.24) is configured on the left side of the screen, and the data
Operating mode /
interface RS-422-C (V.11) on the right. The operating mode and the baud rate can be selected.
baud rate
To edit the operating mode, baud rate and assignment of interfaces:
13 – 206
Select the Programming and Editing operating mode.
Press the MOD key.
Call the setup menu for the serial data interfaces.
Move the cursor to the entry you wish to edit.
Press the GOTO key to display a popup window. Place the cursor on the desired value.
Confirm with ENT.
Use END to exit the interface settings.
Note
The iTNC 530 recognizes automatically when the LSV-2 protocol is used (e.g., data transfer
with TNCremoNT). It is not necessary to set the line Operating mode!
HEIDENHAIN Service Manual iTNC 530