File Management Of Plc Partition - HEIDENHAIN iTNC 530 Service Manual

12.8 File Management of PLC Partition

Calling the
PLC partition
Figure: Program management of iTNC 530
The directory structure is displayed on the left, the associated files are listed on the right.
With the +/- key or with ENTER you can open and close subdirectories.
July 2010
Select the Programming and Editing operating mode.
If open: Close the program management by pressing the END button.
Note
Pressing the MOD key while the program manager is open calls the interface settings.
Call the code number window.
The PLC main page is displayed.
Note
If the dialog READONLY appears on the left side of the screen, the machine manufacturer has
protected the PLC partition with his own code number. As a result, the OEM.SYS system
file cannot be called again. All other PLC files can still be read but cannot be edited any more.
Call the Program Management.
Enter and confirm the code number.
12 – 165