HEIDENHAIN iTNC 530 Service Manual page 614

MP Function and input
MP6505 Probing direction for tool radius measurement for 3 traverse ranges
Input:
1: Positive probing direction in the +90° axis
2: Negative probing direction of the angle reference axis (0° axis)
3: Negative probing direction in the +90° axis
MP6505.0 Traverse range 1
MP6505.1 Traverse range 2
MP6505.2 Traverse range 3
MP6507 Calculation of the probing feed rate
Input:
1: Calculation of the probing feed rate with variable tolerance
2: Constant probing feed rate
MP6510 Permissible measuring error for tool measurement with rotating tool
Input:
MP6510.0 First measurement error
MP6510.1 Second measurement error
MP6520 Probing feed rate for tool measurement with non-rotating tool
Input:
MP6530 Distance from the tool end to the top of the probe contact during tool radius
measurement for 3 traverse ranges
Input:
MP6530.0 Traverse range 1
MP6530.1 Traverse range 2
MP6530.2 Traverse range 3
MP6531 Diameter or edge length of the TT 130 probe contact for 3 traverse ranges
Input:
MP6531.0 Traverse range 1
MP6531.1 Traverse range 2
MP6531.2 Traverse range 3
MP6540 Safety zone around the probe contact of the TT 130 for pre-positioning
Input:
MP6540.0 Safety clearance in tool axis direction
MP6540.1 Safety clearance in the plane perpendicular to the tool axis
MP6550 Rapid traverse in probing cycle for TT 130
Input:
MP6560 M function for spindle orientation during individual tooth measurement
Input:
0: Function inactive
1 to 999: Number of the M function for spindle orientation by PLC
MP6570 Max. permissible surface cutting speed at the tooth edge
Input:
30 – 614
0: Positive probing direction of the angle reference axis (0° axis)
0: Calculation of the probing feed rate with constant tolerance
0.002 to 0.999 [mm]
1 to 10 000 [mm/min]
0.001 to 99.9999 [mm]
0.001 to 99.9999 [mm]
0.001 to 99 999.9999 [mm]
10 to 300 000 [mm/min]
–1: Spindle orientation directly by NC
1.0000 to 129.0000 [m/min]
HEIDENHAIN Service Manual iTNC 530
SW version
and
behavior
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
340 490-05
PLC
RUN
CN123
PLC
RUN
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123