Power Supply Units - HEIDENHAIN iTNC 530 Service Manual

27.3 Power Supply Units

The iTNC 530 is supplied via connector X69 (X169) on the CC,
See "X69: NC power supply and control signals" on page 27 – 481.
Exception: An MC can be connected directly to a UV 106 (B), the CC is not required. This
constellation is intended for machines with analog axes and spindle(s).
The power supply units include:
July 2010
UV 105, UV 105 B and UV 106, UV 106 B power supply units
Note
Further information --> See "Power Supply" on page 17 – 251.
UV and UVR power supply units
UE and UR compact inverters
Note
For detailed information, refer to the Service Manual "Inverter Systems and Motors".
27 – 487