16.2 Examination
The iTNC 530 features comprehensive diagnosis tools, such as DriveDiag, PLC-TRACE or
PLC-TABLE.
These diagnosis tools are suitable for checking the enables on the iTNC 530.
Moreover, the service engineer requires measuring equipment, such as a mulitmeter, etc.
Selecting the
supply device
16 – 232
Select the power supply unit used. --> See "Integrated Diagnostic Functions and DriveDiag"
on page 9 – 89:
Note
Not all status information of non-HEIDENHAIN inverters can mostly be used.
HEIDENHAIN Service Manual iTNC 530