Setting The System Time - HEIDENHAIN iTNC 530 Service Manual

12.5 Setting the System Time

With the single- NC software versions as of 340 49x-03:
processor control
July 2010
Select the Programming and Editing operating mode.
Press the MOD key.
If required, switch to the next soft-key row.
Press the softkey. --> The following window opens:
Set the date, the time (local time) and the time zone.
For the navigation you can use the TAB key or the mouse.
Note
Changeover to winter / summer time is automatic.
If you have made any changes, you will be asked to press the EMERGENCY STOP button and
to restart the control.
Confirm the message with OK. --> The control boots and transfers the new settings.
12 – 159