Checking The Readiness Of The Inverter System - HEIDENHAIN iTNC 530 Service Manual

16.2.4 Checking the readiness of the inverter system

Call via the soft keys DIAGNOSIS --> DRIVE DIAGNOSIS --> DSP
Pages from the
See "Integrated Diagnostic Functions and DriveDiag" on page 9 – 89.
integrated drive
diagnosis
Press the ADC soft key (previously AMP) to obtain information on the height of the dc-link
voltage:
July 2010
Switch on the machine.
Check according to the integrated drive diagnosis or DriveDiag whether the power supply unit
is ready and the dc-link voltage built up:
16 – 243