Meaning Of The Machine Parameters - HEIDENHAIN iTNC 530 Service Manual

30.3 Meaning of the Machine Parameters

Machine parameter lists often contain original HEIDENHAIN comments.
Semicolons ";" designate comments.
Entries after semicolons are not evaluated by the NC software.
Your can enter comments, beginnig with a semicolon, yourself in the MP list. You must have
a write permission for this purpose (correct code number).
If the machine manufacturer has removed the original HEIDENHAIN comments in full or in parts:
Text file
READ_MP.A
Path
PLC:\JH\ ...
The text files LIES_MP.A and READ_MP.A are a component of an NC software update.
This means that these text files are also updated with an NC software update.
Thus you always have the suitable comments on the MPs of your installed NC software!
Do not use the keys GOTO and ENT like in an MP list. Otherwise the editor places the cursor on
Search MP
the line with the indicated number and not on the requested parameter.
numbers in
You are concerned with a text file and not with an MP list!
READ_MP.A.
Use the soft keys FIND and EXECUTE for navigation to the requested MP numbers.
July 2010
Enter the PLC code number.
Open the program manager.
Open one of the following text files:
File
LIES_MP.A
READ_MP.A
Note
Hint:
Transfer the READ_MP.A text file to your service laptop. You can easily refer to the meaning
of the parameters, while the original MP list of the manufacturer is open on the control.
Caution
LIES_MP.A or READ_MP.A also includes the default values for the parameters. They are not
valid for your machine. Only the values in the original MP list are relevant.
Meaning
HEIDENHAIN comments on the MPs in German
HEIDENHAIN comments on the MPs in English
30 – 579