Extracting Files From The Backup File - HEIDENHAIN iTNC 530 Service Manual

13.5 Extracting Files from the Backup File

When a backup is created with TNCremoNT (e.g. of the PLC partition), all related files are stored
in one *.BCK file using a compression algorithm.
To view individual, several or all files you can extract them from the *.BCK file by means of
TNCremoNT.
13 – 196
Start TNCremoNT.
Open the folder that contains the backup of the machine.
Double-click the LST file (*.LST) and open the TNCbackup window.
Sort the files listed here, e.g. by clicking on the bar Path
(You can sort by file name, path, type and file size. Just click the corresponding bar.)
Click Edit/Select all.
Remove the blue check mark by clicking the corresponding icon (blue tick crossed out).
Double-click to mark the files you want to extract. --> The blue check mark appears before the
file name.
Click Run/Extract (or the corresponding icon).
You can extract the selected files either directly or together with the corresponding directory
structure into your backup directory.
Now the extracted files can be read, transferred individually, etc.
Close the TNCbackup window.
Do not save changes regarding the blue ticks.
Caution
If your store the set marks your *.LST file after extraction, only the marked files of this
backup will be restored in a later process!
HEIDENHAIN Service Manual iTNC 530